Low insertion loss is exhibited in every path in NZ5762S, from the antenna port to any of the RF port, with high isolation between both opposite and adjacent paths. In addition, the NZ5762S also achieves excellent linearity performance, suitable for 3G and LTE applications. The internal decoder allows convenient GPIO connections and supports digital control signals. The SOI architecture in NZ5762S removes the external DC blocking capacitors to save the cost and PCB space for end customers.
The NZ5762S is a SP4T (single-pole four-throw) antenna switch module, designed for multimode broadband cellular applications, supporting UMTS, TD-SCDMA and LTE from 100MHz to 3.0GHz. The RF performance is optimized with low insertion loss and low harmonics to guarantee the stringent requirements of all 3G/LTE standards.
No external DC blocking capacitors are required as long as no DC voltage is applied on any RF path.
The NZ5762S integrates a SP4T switch and a GPIO controller on a single SOI chip. Equipped with 4 symmetrical transmit/receive ports for UMTS/TD-SCDMA/LTE, the NZ5762S is providing the most versatile combinations of operation in different modes.
The NZ5762S is encapsulated in a compact 1.1mm x 1.1mm LGA package, with low profile of 0.55mm. This product is RoHS-compliant and halogen free.
The NZ5762S is rated to Moisture Sensitivity Level 3(MSL3) at 260°C per JEDEC JSTD-020.
• Broadband support 0.1-3.0GHz
• Compatible with UMTS, TDSCDMA, and LTE
• Advanced SOI process
• Low insertion loss
• Excellent linearity
• 4 symmetrical RF ports
• GPIO control interface
• Ultra small LGA footprint, 1.1mm x 1.1mm x 0.55mm, 9-pin
• Green product
Copyright 2016-2023 www.lansus.com All Rights Reserved
粤ICP备16089262号 粤公网安备 44030502008777号